aldivia.com.ar is a studio that offers services mainly linked to architecture.

Terms and conditions of use

RELEVANT INFORMATION

Introduction

It is a necessary requirement for the acquisition of the products and/or services offered on this site that you read and accept the following Terms and Conditions written below. The use of our services as well as the purchase of our products will imply that you have read and accepted the Terms and Conditions of Use in this document. All products and/or services offered by our website could be created, charged, sent or presented by a third party website and in such case would be subject to their own Terms and Conditions. In some cases, to purchase a product, registration by the user will be necessary, with the entry of reliable personal data and definition of a password.

By submitting a monetary advance to begin work, you agree to our stated policies, terms and conditions. We undertake to comply with the terms of the agreement and provide the agreed services in a timely and satisfactory manner. The monetary advance will be used to cover the initial costs of the project, such as the acquisition of materials and resources necessary to carry out the work. In the event of changes to project details or delivery times, we reserve the right to review and adjust the cost of the work. However, we are committed to communicating any changes to the terms of the project and obtaining your consent before proceeding with the work. By sending a monetary advance, you acknowledge that you have read and accepted our policies, terms and conditions, agreeing to comply with the established terms to ensure a satisfactory work experience.

The following terms and conditions (hereinafter, “Terms”) apply to the use of the services offered by Aldivia (hereinafter, “Company”).

LICENSE

The Company, through its website, grants a license for users to use the products and/or services that are sold on this website in accordance with the Terms and Conditions described in this document.

The unauthorized use of our products and graphic representation is strictly prohibited and criminal proceedings are carried out.

UNAUTHORIZED USE

In case it applies (for sale of software, templates, or other design and programming product) you may not place one of our products, modified or unmodified, in memory, website or any other media and offer them for redistribution or resale of any kind.

PROPERTY

You cannot declare intellectual or exclusive property to any of our products, modified or unmodified. All products are the property of the content providers. Unless otherwise specified, our products are provided without warranty of any kind, express or implied. In no event shall this company be liable for any damages including, but not limited to, direct, indirect, special, incidental or consequential damages or other losses resulting from the use or inability to use our products.

REFUND AND WARRANTY POLICY

In the case of products that are non-tangible irrevocable merchandise, we do not issue refunds after the product is shipped, it is your responsibility to understand before purchasing. We ask you to read carefully before you buy it. We only make exceptions to this rule when the description does not fit the product. There are some products that may have a guarantee and the possibility of a refund, but this will be specified when purchasing the product. In such cases, the guarantee will only cover failures on the part of our work team, not third parties, and it will only become effective when the product has been used correctly. The guarantee does not cover breakdowns or damage caused by improper use. The terms of the guarantee are associated with design and operation failures under normal conditions of the products and these terms will only become effective if the equipment has been used correctly. This includes:

– Appropriate use of product measurements and sizes.
– Correct description and dialogue with our team.
– According to the technical specifications indicated for each product.
– Under environmental conditions in accordance with the specifications indicated by the manufacturer.
– In specific use for the function with which it was designed.
– Under electrical operating conditions in accordance with the specifications and tolerances indicated.

LATE SENDING OF THE NECESSARY FILES

Once the work confirmation payment has been sent, you will have 6 (six) hours to send the files necessary to carry out the requested work. If the established time is delayed, the Company team renounces the responsibility of sending the final work on the date agreed upon by contract.

ANTI-FRAUD CHECK

The customer's purchase may be deferred for anti-fraud checking. It can also be suspended for a longer time for a more rigorous investigation, to prevent fraudulent transactions.

Formation Process

Our contract with the client is established by sending a detailed quote. This budget includes:

• Services/products to be delivered
• Payment currency
• Quote validity date
• Leader in charge of contract development
• Customer information
• Costs and quantities
• Reviews
• Delivery Time
• TOTAL, ADVANCE and REST values
• Commitment note to the Terms and Conditions
• Direct access to Terms and Conditions

The contract is considered formalized once the client sends a monetary advance, which implies the acceptance of these terms and conditions and the commitment to comply with them, both on the part of the client and the company.
All our contracts have visible access to the terms and conditions, ensuring that the client is fully informed before proceeding with any transaction.

Free Reviews

Our contracts include a specific number of free reviews, detailed in the initial quote. They are subject to the scale and type of work to be carried out.

Costs of Future Reviews

Any additional revisions beyond those specified in the initial quote will have an additional cost, which will be detailed and agreed upon before proceeding with such revisions.

Delivery Time

The delivery period of the work can be modified at the client's request for an additional cost. These modifications will be discussed and agreed before any changes are made. Those that will be modified upon request are found as in the following items.
Standard: The delivery times detailed in the quote are considered standard. The company does not commit to a specific delivery date and does not assign extra staff to speed up work.
Quick: In this modality, the company gives priority to the project in question to deliver it as soon as possible, although without committing to a specific date.
With Deadline: The company agrees to deliver the project on a specific date, which will be clearly indicated in the contract.

Client Commitments and Responsibilities

The client undertakes to provide all the information and documentation necessary for the correct execution of the contract, make the advance payment and subsequent payments as agreed in the budget, comply with the reviews and approvals within the agreed deadlines to avoid delays in delivery and not delay delivery with absences from meetings and late responses.

Commitments and Responsibilities of the Company

The Company undertakes to deliver the services/products detailed in the budget in accordance with the agreed terms, inform the client of any necessary changes or adjustments to the project, comply with the agreed delivery times according to the modality selected by the client.

Scope of the Company's services

The scope of the services offered are detailed in the description of each item in our official catalog at www.presupuestoonline.com.ar. Each description specifies the components, features and limitations of the product, ensuring that the customer has a clear and complete understanding of what they are purchasing.

Exclusion of Unspecified Elements

Any item not explicitly detailed in the product description or quote is not included in the scope of the contract. The customer should carefully review all specifications to ensure that all necessary items are included.

Exclusion of Liability

The company is not responsible for delays or errors caused by lack of information or documentation provided by the client, delays caused by modifications requested by the client, and errors or problems resulting from the participation of third parties.

Resolution

The resolutions we work with are: HD 720px – Full HD 1080px – Ultra HD 4k – Ultra HD 8k. Once the image or video has been sent, the work is considered finished, except for having agreed on possible modifications, of which the cost is established by contract before starting the work. If you want to change the final resolution, this will be affected at an extra cost for modification outside of the contract.

3D modeling

If you already have a 3D model of your project we can work with them, otherwise we carry out the modeling from a DWG plan which has an extra price for the work. Depending on the status of the file, it will be taken as "suitable for work", "corrections needed" or "unusable for work". All corrections made to the DWG file will carry a cost for extra work. You must take into account the provision of digitized plans, since working with plans on paper will have a higher price.

Using 3D Modeling Libraries

The company uses elements from the SketchUp 3D Sandbox and the library Chaos Cosmos for the creation of architectural models and renders. Any furniture, decorative element or vegetation that is not included in these libraries will not be modeled by default. If the incorporation of customized elements or elements outside of these resources is required, the client must request it in advance and said service will have an additional cost, which will be budgeted according to the complexity of the model.

Files to receive

We work based on and from projects expressed in ACAD 2D, REVIT 2D AND 3D, 3D MAX and SKETCHUP 3D, we remember that 2D projects will be quoted separately for 3D modeling.
We ask that before sending any 2D file, verify that points, strokes and lines match properly, since if they do not, it will be classified as "necessary corrections" and it is not suitable for making the 3D model and we should correct your project, which will have an additional quote.
In the case of starting from a previous 3d model sent by you, make sure you have a correct dimensioning of measurements in the model, otherwise if you want to make changes in measurements and dimensions on our part, this will be quoted.

Amount

At the time of writing the contract, you will be asked to specify the work to be performed, the number of units to be requested, their specifications and details. Once the contract is closed, changes that modify the deed on a large scale will not be accepted, remembering that once the contract is closed, our team begins to work. Any corrections, manipulations or additions after closing the contract will be quoted as extra costs upon completion of the work. The 3D modeling team has the possibility of requesting an extra monetary value if it is a project whose 3D modeling difficulty was not able to be correctly measured at the time of sending an initial budget and it is misaligned with the corresponding quote in its proper development.

Deliveries, work deadlines and delays

The files are delivered on time and in accordance with what was agreed by contract as long as the corrections do not delay their delivery time. You will be able to receive the files in (.PNG – .JPG) by ZIP Compressed via Email.
At the time of receiving the test files for corrections or approvals (They are sent once, when approved by the client, each subsequent modification to the project will be classified as a Correction. Read the “Corrections” section), before closing the project, these will not have the assigned quality and will have a watermark, once the final payment is credited and the project is closed, you will receive the respective desired files in the quality assigned at the beginning of the project and without a watermark so that you can use it free of copyright, you are owner of your project. We do not deliver project completion without prior payment.

Depending on the project to be completed, its status and/or progress, requested services, and possible corrections, we will offer three delivery time options: STANDARD, RUSH, and DEADLINE, each with its respective costs and timeframes tailored to your project.

Our team is human, for this reason we can experience difficulties in certain projects that can modify the delivery times, if this is the case, you will be informed that it will not be possible to reach the agreed deadline, if the delay exceeds 24 hours and you will never be notified. notice of a possible delay, a discount will be applied for the inconvenience, as long as the delay is not due to changes in the contract, corrections by the client or failures in the files sent by the client. To apply this discount, it will only be taken due to failures of our team.

Reviews

Modeling and rendering processes are expensive in terms of time and labor, due to which corrections can delay delivery times. Each project includes a certain number of revisions at no cost detailed in the contract. After using them and requesting another correction, an additional charge will be made for each one, a value that will be detailed in the contract.

Quotable corrections are given once the photograph has been rendered with the final file because it is the most expensive stage in terms of time and work. Any change in the image that requires re-rendering the model is taken as a correction.
Changes in the dimensioning of the model.
Changes in materiality or colors of the model.
Changes about the furniture or decoration.
Changes in light and sunlight.
Changes in camera angles and perspective.

Intellectual property

All images used on our service have been obtained with permission from the copyright owner, and are used for informational purposes only. We own and retain all intellectual property rights related to our Service, including but not limited to copyrights, trademarks, patents, and database rights.

Use of the service

By using our service, you agree not to reproduce, duplicate, copy, sell, resell or otherwise exploit for commercial purposes any part of our service without our prior written consent.

User Generated Content

When using our Service, you may have the option to create and share User Generated Content. By creating and sharing such content, you represent that you have all necessary rights to do so, and that such content does not infringe any third party intellectual property or privacy rights.

Limitations of Liability

In no event will we be liable for any direct, indirect, incidental, special, consequential, or punitive damages arising from the use of our service, including but not limited to loss of profit, data, or use of the service, even if we have been advised of the possibility of such damages.

Links to third party websites

Our Service may contain links to third party websites. We are not responsible for the content, security or privacy of these websites, and your use is subject to the terms and conditions of those sites.

Modifications

Our Service may contain links to third party websites. We are not responsible for the content, security or privacy of these websites, and your use is subject to the terms and conditions of those sites.

Use of the Service

The Service consists of providing on-site marketing services to promote a specific project or product. The Company will work with the client to coordinate site visits, design programs and weather dependency to plan site meetings. The Service may also require long-distance travel and specific meeting times.
The Client agrees that the use of the Service will be for commercial purposes and any personal use of the Service will require the prior written consent of the Company.

Client Responsibility

The Client agrees that it will be responsible for ensuring safety on site and for complying with all applicable laws and regulations on the site. Customer will also be responsible for providing any equipment or supplies necessary to perform the Service.
The Client agrees that any damage or injury that occurs on site during the provision of the Service will be the sole responsibility of the Client.

Limitation of Liability

The Company shall not be liable for any direct, indirect, incidental, special, consequential or punitive damages arising from the use of the Service. The Client agrees that the Company shall not be liable for any loss or damage arising from the use or inability to use the Service, including any loss of profit.

Delivery of Materials and Site Visits

Upon receiving confirmation to begin design work, the client must provide all materials necessary to carry out the project. If you do not have the necessary material, the option of a site visit by a member of the company will be offered. This visit will have an additional cost, determined by the distance to the project.

Stages of Design Work

The design work is divided into two stages: preliminary assembly and final delivery.
During the preliminary assembly stage, the quality of work will be a simplified and quick version to facilitate internal manipulation. Once the design is confirmed, the final delivery will proceed, where the work is presented in its final quality and the project is closed.

Revisions and Changes

Revisions start counting from the first delivery, whether in draft format or in the final delivery. At this point, the client has the opportunity to provide feedback and request modifications, which will be considered as revisions within the work process.

The client may request that different design options be presented for the same project, each of which will be counted as a revision. The typologies presented may differ from each other and may not necessarily strictly follow the client's initial requests. Their purpose is to offer different architectural perspectives and solutions, exploring alternatives that may add greater value to the project.

Cualquier revisión adicional que supere el número establecido en el contrato implicara un costo extra el cual esta detallado en el contrato.

Information and Data for Design

When delivering the materials to carry out the design, the client agrees to provide the greatest amount of data, images, preferences, styles sought, and any relevant information. This step is essential to facilitate the client's understanding and vision, minimizing the need for unnecessary revisions.

Assembly and Delivery of Plans

The Company undertakes to carry out the assembly and delivery of architectural and engineering plans according to the specifications agreed upon in the budget approved by the Client.
Los planos pueden ser entregados firmados y matriculados o sin matricular, según lo acordado previamente en el contrato. Los costos asociados con la firma y matriculación de los planos serán detallados en la planilla anexa y figurara el total en el contrato de obra. Los valores de dicho contrato están totalmente desvinculados con la Empresa y el mismo cumple las leyes nacionales y provinciales.

Taxes and Expenses

All taxes, stamps and municipal expenses necessary for the approval of the plans are the responsibility of the Client. The Company is not responsible for any administrative or execution costs.

Norms and Value of Plans

The plans may or may not be made in accordance with the regulations of the corresponding municipality, depending on the needs and specifications of the Client. The conformity of the plans with municipal regulations can affect their value and the decision to deliver them signed and with registration.

Those works specified in the Work Budget document are totally unrelated to a professional firm and the company does not undertake to comply with any regulations related to construction. The execution of the material provided by the company to the client is the total responsibility of said client.

Those works specified by a Work Contract under legal authority are subject to the national and provincial regulations where said contract is signed.

Quantity and Type of Plans

The quantity and type of plans to be delivered will be detailed in the agreed budget. Any addition to what is specified in the budget will have an additional cost, which will be added later to the final budget.

Exclusion of Liability

The purchase or payment of a plan is not linked to the mandatory delivery of another plan that is not detailed in the budget with its respective value, whether complementary or not.

The Company is not responsible for surveys carried out by third parties, nor for printing or scale errors.

Plan Details

The plans will detail the paper on which they are drawn, clearly indicating the corresponding scale.

Client Responsibilities

The Client is responsible for providing all the information and documentation necessary for the correct preparation of the plans.
The Client must cover all additional costs that arise due to changes in the initial specifications or additional requirements that were not contemplated in the original quote.

Confidentiality

The Company guarantees the confidentiality of all information and documentation provided by the Client for the preparation of the plans. This information will not be shared with third parties without the Client's prior consent.
La empresa tiene derecho de utilizar toda información elaborada y recolectada durante el trabajo para el desempeño de publicidad y portafolio corporativo. Si por decisión del cliente no desea compartir públicamente el material previamente dicho deberá dejarlo claramente por escrito a un personal de la empresa por el canal de comunicación utilizado para confirmar el trabajo.

Claims and Guarantees

Any claim regarding the quality or conformity of the plans must be communicated in writing to the Company within a period of 10 business days from the date of delivery.
The Company undertakes to review and, if appropriate, correct any errors in the plans within a reasonable time, at no additional cost to the Client, provided the error is attributable to the Company.

Licitaciones ALDIVIA

Introduction

The platform developed by Aldivia | Architecture and Engineering Studio, designed to connect professionals, technicians, and contractors with job opportunities from our firm, business partners, and authorized third parties through the loan of a license plate for the publication of their job postings.

Platform object

The platform aims to facilitate access to job opportunities in the fields of construction, design, architecture, engineering, and related trades. Job postings may be made by the Company, its business partners, and third parties authorized to post job openings.

Applicant users

To access job postings, interested parties must register on the platform. Registration requires a valid email address, which will be used to provide exclusive access to job postings, share exclusive blog content within the platform, and send notifications about new job openings or system updates.

Client Tenderer Registration

To post job opportunities on the platform, users must have a Client Bidder Registration. Obtaining this registration is subject to direct registration payment. Users must demonstrate verifiable experience in the construction field and meet the standards of quality, technical knowledge, and professional integrity defined by the Company. Acceptance is subject to review and validation by the administrative team. Clients of the Company who have contracted construction or management services through the Company may access the platform as part of the general quote or contract, in accordance with the terms agreed upon with the manager in charge.

Restrictions on Registration

If the client lacks the technical or professional capacity to draft calls for proposals clearly, accurately, and responsibly, the preparation of such publications will be undertaken by a member of the Company's team, in collaboration with the client.
The Client Bidder Registration does not grant any type of exclusivity or ownership over the platform or its functions.
Misuse of the license, including fraudulent, ambiguous, poorly written, misleading, or harmful publications, will be grounds for immediate revocation of the license without a refund.

The Company reserves the right to suspend, limit, or terminate the access of any user who violates these guidelines or jeopardizes the integrity of the platform.

Publication of offers

All publications must meet the following requirements to ensure clarity, seriousness and professionalism:

• Clear, objective and unambiguous writing.
• Detailed description of tasks, deadlines, requirements and conditions.
• Inclusion of all necessary technical documentation so that the applicant can correctly interpret the scope of the work.
• Instructions on the selection process and award criteria (if applicable).

The Company reserves the right to edit, reject, or delete any posts that do not meet the established criteria without prior notice.

Seriousness and Commitment

Both applicants and bidders agree to maintain professional conduct based on good faith, mutual respect, and compliance with the commitments made.
Any conduct that violates these principles may result in the suspension or deletion of the user.

Tenders and Awarding

The platform may include bidding processes. In these cases, guidelines, recommendations, and best practices will be offered to improve the chances of being awarded a contract. However, the final decision on the award of a contract will depend exclusively on the respective bidder.
The Company does not guarantee the assignment of jobs to any applicant.

Limitation of Liability

The Company acts as an intermediary facilitating opportunities and is not responsible for compliance with agreements between the parties, nor for possible breaches, damages, or losses arising from employment relationships established through the platform.

Payments

Accepted forms of payment

The Company accepts the following forms of payment: bank transfers (in Argentine and Uruguayan banks), cash payment (hand to hand), Payoner and cryptocurrencies (registered on the Binance platform). Each payment element is subject to an economic increase in percentage of the total if the intermediary platform requires it. If your country does not accept the methods mentioned above, please contact a member of the team to find a payment method that suits your situation.

Advance of 30%

To begin the requested work, the Company will require an advance of 30% of the final budget. Once payment is received, work will begin on the project.

Payment confirmation

The Company will not take the payment until it appears in your bank account. Once the payment is confirmed, a proof of payment will be sent to the client and work on the project will begin.

Final budget

The final quote is frozen in relation to the agreed currency during the period of validity of the quote. The addition or removal of services/items cancels the quote and requires an appropriate revaluation. The Company reserves the right to charge an additional fee if extra work is requested or difficulties arise outside the original scope of the project.

When the advance payment is confirmed, the unit values ​​of services are frozen for future budget revaluations.

Delivery times

The delivery time will be stipulated in the quote and will begin counting from the moment the advance is received. The Company will endeavor to meet delivery deadlines, but does not guarantee that they will be met in cases of force majeure or circumstances beyond its control.

Work Delivery

All services and/or products that the Company offers will not be delivered until one hundred percent of the payment appears in the final budget has been confirmed. After confirmation, the client will be provided with the release of the work/product and will have, if agreed, the guarantee/revisions agreed in the contract.

Cancellations

In case of cancellation of the project by the client, the following cancellation policies will apply:

• If canceled before work has begun on the project, 70% of the advance will be refunded.
• If canceled after work has started on the project, no refund will be made.

Newsletters

Introduction

By sharing an email after having accepted the terms and conditions, you allow us to use this means of contact both by the staff and the website's automated email system. Which is responsible for massively sending relevant information about the study to each subscriber.

Unsubscription

When you receive the first advertising email, which does not include those sent by the staff, you have the possibility of unsubscribing from the automated newsletter, where you will find a link that will allow you to remove yourself from the subscriber list.

Closing

Applicable law

These terms and conditions shall be governed by and construed in accordance with the laws of the jurisdiction where the Company is located.

Jurisdiction

Any dispute arising out of these terms and conditions, including any dispute as to their existence, validity or resolution, shall be submitted to the exclusive jurisdiction of the courts of the jurisdiction where the Company is located.

Waiver of Right to Trial by Jury

The client waives any right it may have to a jury trial in any action or proceeding related to these terms and conditions, the client also waives any right to bring a lawsuit in any court in relation to any service provided by the Company. Any disputes that arise between the client and the Company will be resolved by binding arbitration in the jurisdiction where the Company is located, in accordance with the rules and procedures established by the selected arbitration center. Customer agrees that any arbitration award shall be final and binding, and may be entered in any court of competent jurisdiction as a judgment in the jurisdiction where the Company is located.

No waiver of rights

Failure to exercise any right or provision of these terms and conditions shall not be construed as a waiver of that right or provision.

Divisibility

If any provision of these terms and conditions is held invalid or unenforceable, that provision will be removed or limited to the minimum extent necessary so that the other provisions of these terms and conditions remain valid and enforceable.

Full agreement

These terms and conditions constitute the entire agreement between the client and the Company with respect to the service being provided and supersedes any prior agreement or understanding, whether oral or written.

By accepting the terms and conditions, the client agrees that they will be governed by these legal provisions and that there will be no exception to them, unless otherwise agreed in writing between both parties.

Privacy

RELEVANT INFORMATION

This aldivia.com.ar guarantees that the personal information you send has the necessary security. The data entered by the user or in the case of requiring validation of the orders will not be delivered to third parties, unless it must be revealed in compliance with a court order or legal requirements.

Subscription to advertising email newsletters is authorized instantly upon acceptance of the terms and conditions. You can unsubscribe at the end of each email sent automatically by the website system. Emails sent by study staff are not categorized as advertising email.

The Company reserves the right to modify these terms and conditions at any time. Changes will be effective immediately upon posting on our website. By continuing to use our service after the posting of any changes, you agree to be bound by the modified terms and conditions.

The prices of the products offered on the Website are valid only as a reference unit, we are not responsible for misinterpretations since it is clarified repeatedly and visibly.

PAYMENTS

The Company does not have online store services, to make your payments or advances you must contact the appropriate member of the team who will carry out the transaction. Once the payment has been made, it is vitally important to save transaction confirmation receipts for occasions such as complaints or purchase verification from our team.

We disclaim responsibility for third party payments towards our products.